Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-24E400NA14 User Manual

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
34
Cautions
• Batteries should not be exposed to excessive
• Battery chemicals can cause a rash. If the
• Make sure that batteries are disposed of
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
• If the remote control is not going to be used

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
www.insigniaproducts.com
NS-24E400NA14 Insignia 24" LED TV
heat, such as sunshine, heat registers, or fire.
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin,
wash immediately.
correctly. Do not burn or incinerate.
depleted.
for an extended period of time, remove the
batteries.
sensor on the front of your TV. For the location
of the remote sensor, see "Front" on page 7.