Table of Contents
Advertisement
Troubleshing and Specification
press
/
to set hour and minute. ON indicates
the On/Off Time function is enabled while OFF
indicates the function is disabled.
• After finishing time setting, press OK or MENU to
.
confirm.
Note
After setting the On/Off Time function, if the TV is AC
off or forcible DC off, the function will be automatically
cleared.
On channel:
This function is used in combination with
the On/Off Time function. When the TV turns on upon
reaching the On time, it automatically enters the preset
channel.
•
Press
/
to set the On Channel or OFF.
Remind Time/Remind channel:
remind channel functions allow the TV to automatically
enter the preset channel at preset time. If the TV is AC off
or forcible DC off, the preset time will be cleared.
•
Press
MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press
/
afterwards press
Time option.
•
Press OK to enter the setting screen, and then
press
/
to select ON or OFF, if you select ON,
press
/
to set hour and minute, and then
press
/
to adjust time.
•
After finishing time setting, press
confirm
•
Press
/
to select the Remind Channel
option, and press
Lock Setup
The television has the function of security default lock.
Password needs to be entered when the program lock
mode is to be set.
How to use the password function
Press H. LOCK, the TV screen will display Enter Password
to prompt the user to enter a correct password by
pressing corresponding numerical keys; if the password
is correct, the user enters the Lock Set menu; if incorrect,
the user is required to enter a password again.
If there is no operation for a few seconds, the display will
20 LED -LCD television Owner's Manual
The remind time and
to select the Timer menu,
/
to select the Remind
OK or MENU to
/
to set the found.
automatically disappear.
The Lock Set menu is as follows:
Lock Set
Change Password
Tuning Lock
Preset Source
Preset Prog
Source Lock
Child Lock
Max Volume
Power On Volume
Unlock
Change Password
After entering the Lock Set menu, press
select the Change Password option, and then press
/
to display the Change Password menu,
afterwards enter a new 4-digit password by pressing
numerical keys and repeat entering this password
once, and finally select the option to be confirmed
and press MENU to confirm, indicating the successful
change of password.
If the user does not want to change the password in
halfway, he may press MENU to exit from this menu.
Note
The initial password is 0000, and the password setting
will not be changed after executing the Unlock
option.
Tuning Lock
Press
/
to select the Tuning Lock option, and
then press
/
to set ON or OFF.
(If set ON, the Tuning Menu is not available in TV
mode. To make any operation related to the Tuning
Menu, it is necessary to enter the Lock Set menu to
set Tuning Lock OFF or execute the Unlock option.)
Preset Source Setting
Preset Source may be set as Off, TV, AV,Component,
HDMI, PC and USB. When the Preset Source is set as
TV, after entering the Preset Channel menu, press
/
to select the preset channel, and the channel
will be forcibly switched to the preset one upon
turning the TV on; when the Preset Source is set as
other signal sources, the TV will be forcibly switched to
the preset source upon turning on. For example, when
the Preset Source is set as YP
switched to YP
P
/YC
C
b
r
b
OK
off
off
off
OK
off
100
off
OK
/
to
P
/YC
C
, the TV will be
b
r
b
r
upon turning on; when set as
r
Advertisement
Table of Contents
