Haier L32A8A How To Use Manual
  1. Manuals
  2. Brands
  3. Haier Manuals
  4. TV
  5. L32A8A
  6. How to use manual
Haier L32A8A How To Use Manual

Haier L32A8A How To Use Manual

User manual
Hide thumbs Also See for L32A8A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual

External Equipment Connections

PC connection
How to connect
1
. To get the best picture quality, adjust the PC
graphics card to ( 1024x768),60Hz.
2
. Use the TV`s PC IN port for video
connections, depending on your PC
connector.
3
. Then, make the corresponding audio
connection. If using a sound card, adjust the
PC sound as required.
How to use
1
. Turn on the PC and the TV.
2
. Use TV/AV on the remote control to select
PC source.
3
. Check the image on your TV. There may be
noise associated with the resolution, vertical
pattern, contrast or brightness in PC mode. If
noise is present, change the PC mode to
HDMI/DVI
IN1
AC IN
Y
Pb/Cb
HDMI/DVI
PC IN
IN2
Y
Pb/Cb
Resolution
Mode
PC
SPC
XGA
another resolution, change the refresh
rate to another rate or adjust the
brightness and contrast on the menu
until the picture is clear. If the refresh
rate of the PC graphic card can not be
changed, change the PC graphic card or
consult the manufacturer of the PC
graphic card.
NOTES:
1
Use a PC cable.
2
Avoid keeping a fixed image on the
TV's screen for a long period of time.
The fixed image may become
permanently imprinted on the screen.
3
The synchronization input form for
Horizontal and Vertical frequencies is
separate.
Pr/Cr
IN2
SCART1
SCART2
RGB
Y/C
IN1
Pr/Cr
Resolution
640*480
800*600
1024*768
HD-AUDIO
PC/DVI
ANT IN
AUDIO IN
HD-AUDIO
Line
Frame
frequency
frequency
(Khz)
(Hz)
31.5KHz
60Hz
37.9KHz
60Hz
48.4KHz
60Hz

Advertisement

Table of Contents
loading

Related Manuals for Haier L32A8A

Summary of Contents for Haier L32A8A

  • Page 1: External Equipment Connections

    External Equipment Connections PC connection How to connect another resolution, change the refresh rate to another rate or adjust the . To get the best picture quality, adjust the PC brightness and contrast on the menu graphics card to ( 1024x768),60Hz. until the picture is clear.

  • Page 2: Connecting Headphones

    External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume may damage your hearing.

  • Page 3: Set Up Your Tv

    Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation.

  • Page 4: Tuning Menu

    Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search Press MENU button and then use CH+/- button to select the TUNING menu.

  • Page 5: Manual Search

    Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Press MENU button and then use CH+/- button to select the TUNING menu. MENU PICTURE Press VOL+/- button and then use CH+/- button to Tuning Program AUDIO Country...

  • Page 6: Program Table

    Tuning menu Program Table Press MENU button and then use CH+/- button to select the TUNING menu. MENU Press VOL+/- button and then use CH+/- PICTURE Tuning Program button to select Program Table. AUDIO Country England ADJUST Auto Search Program Table TUNING Press VOL+/- button to enter the submenu.

  • Page 7: Edit Name

    Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. Press MENU button and then use CH+/- button to select the TUNING menu.

  • Page 8: Program Swap

    Tuning menu Skip After the programs are presetting, you can skip some programs so that to select your favorite channels only. Press MENU button and then use CH+/- button to select the TUNING menu. MENU Press VOL+/- button and then use CH+/- PICTURE button to select Program Table.

  • Page 9: How To Select The Desired Program

    Tuning menu You can watch TV program in a presetting channel. How to select the desired program Using "Program number" buttons Press digit button to select the program. If 2-digit or 3-digit programs are selected , press digit buttons you needed continuously within 3 seconds If selected channel program is set at Lock on mode and no password has been entered after initiation of...

  • Page 10: Picture Adjustment

    Picture Adjustment The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. picture modes The picture mode provides the pre-defined images settings. Press the P.STD button to select the option.(Normal/Soft/Personal/Bright) Personal: A spare setting that can be adjusted to personal status...

  • Page 11: Sound Adjustment

    Sound Adjustment Sound modes The sound mode provides the pre-defined sound settings. Press the S.STD button to select the option.(Music/Personal/Standard/Hall) This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received. Press CH+/- button to Select Audio Mode, Music Personal Standard or Hall.
  • Page 12 Sound Adjustment Eliminate sound When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen.

  • Page 13: Time Setting

    Time Setting Clock setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power, the clock loses power and will need to be reset when the power is reconnected. Press MENU button and then use CH+/- button to select the TIMER menu.

  • Page 14: Function Menu

    Function menu It is possible to select language, OSD transparent, Menu Timer and Calendar of the menu as follows: Function setup Press MENU button and then use CH+/- button to select the FUNCTION menu. Press VOL+/- button and then use CH+/- MENU button to select the desired option.

  • Page 15: Adjust Menu

    Adjust menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Adjustment Setup When PC input mode is set Press MENU button and then use CH+/- button to select the ADJUST menu. Press VOL+/- button and then use CH+/- button to select the desired option.
  • Page 16 Adjust menu In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: Adjust This is used for adjusting H Position and V Position as well as relative parameters in PC and modes.(Phase Adjust is not available in HDMI) Press MENU button and then use CH+/- button to select the ADJUST menu.

  • Page 17: Lock Setup

    Lock setup The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Lock setup Press H.LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the LOCK menu will be displayed. If the password is not correctly entered, you will be required to reenter the password and the cursor will remain onscreen.

  • Page 18: Source Lock

    Lock setup Prog Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, Source Lock such as AV, Scart and PC.

  • Page 19: Other Functions

    Other functions NICAM If the broadcaster is transmitting Bilingual sound service. The button on the remote controller will allow up to 2 separate languages to be selected. You can press the button to make a choice. Display function If current program number, color system and sound system are to be displayed on the screen, press DISPLAY button, and all the related AUTO information will appear at right up corner of the screen.

  • Page 20: Teletext Functions

    Teletext functions Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.).
  • Page 21 Teletext functions (MIX) While in Teletext mode press the button will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number.

  • Page 22: Maintenance

    Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen .

  • Page 23: Specifications And Functions

    Specifications and functions L26A9A L32A9A L37A9A 1366X768(Dot) 1366X768(Dot) 1366X768(Dot) ~150-240V , 50/60Hz PAL, SECAM, NTSC D/K,I,B/G,L,L Sound System External Antenna 75 ohm Impedance Storage Temperature 90%, non-condensing Storage Humidity L26A9A L32A9A L37A9A Model Size (Wx x ) unit: mm 679 246 525 811 246 621 946 310 710 main component...

  • Page 24: Troubleshooting

    Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Verify if the television is properly plugged. No picture, no sound Verify if the television is properly supplied power.
  • Page 25 0090508429A 01...

Table of Contents