Fujitsu LifeBook V1010 Bios Manual page 6

L i f e B o o k V S e r i e s N o t e b o o k B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed.
Main
Type:
Total Sectors:
Maximum Capacity:
F1 Help
ESC Exit
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field Options
■
Type: Auto
■
None
LBA Format
Total Sectors: ---
Maximum
---
Capacity:
6
PhoenixBIOS Setup Utility
Drive0 [FUJITSU MHV2080BH]
[Auto]]
LBA Format
156301488
80026MB SATA1
Select Item -/Space
Select Menu Enter
Figure 2. Drive0 Submenu
Default
[Auto]
---
---
Item Specific Help
Select Serial ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values F9
Select Sub-Menu F10
Description
Automatically selects the ATA/ATAPI device type. To change the
selection, press the spacebar. Select Auto to have the type automat-
ically identified by the BIOS at POST. Select None if you don't want
to select a primary master.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
Setup Defaults
Save and Exit