Universal Remote Control 8 - HCT HLD-32AT User Manual

Universal Remote Control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
CH.LIST HDMI
TV VIDEO S-VIDEO
P.MODE S.MODE
CC
OK
VOL+
VOL-
8 TV LCD-TFT
SELECT
PC
COMPONENT
FREEZE
CH+
CH-
Q.VIEW
1 POWER
Press to turn on and off the TV
2 CH.LIST
Open the channel list.
3 Shortcut Button of Input
TV:Press to enter TV signal;
VIDEO:Press to enter VIDEO signal;
S-VIDEO: Press to enter S-VIDEO signal;
COMPONENT : Press to enter COMPONENT signal.
4 VCR/DVD Functions
Control some video cassette recorders or DVD players.
/ Rewind / Fast
Stop Play/Pause
5 P.MODE
Selects the picture mode appropriate
for the program's character.
6 CC(closed caption)
Select a closed caption.
7 TIME
Shows time.
8 MENU
Brings up the main menu to the screen.
9 EXIT
Clears all on-screen displays and returns to TV viewing
from any menu.
10 ARC(Aspect Ratio Control)
Changes the aspect ratio.
11 MUTE
Switches the sound on or off.
12 VOLUME UP/DOWN
Press to adjust the volume.
13 Numeric buttons
Press to change the channel.
14 - button
Press to select additional channels (digital )being
broadcast by the same station. For example, to select
channel"54-3", press "54", then press "-" and "3".
15
TV DVD VCR SETBOX CABLE AUDIO
Press the SELECT button repeatedly to select
one of the system modes in which the remote
control can be used. When the desired device is
selected, the corresponding LED lights on 5 seconds.
16 PC
Press to enter PC signal.
17 HDMI
Press to enter HDMI signal.
18 S.MODE
Selects the sound mode appropriate for the program's
character.
19 FREEZE
Freezes the currently-viewed picture, but audio continues.
Press FREEZE button again to resume the normal picture.
20 INPUT
Show the input source mode.
21 INFO
When you watch the TV, press the key, the information
displays on top of the screen.
22 THUMBSTICK (Up/Down/Left/Right/OK)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
23 SLEEP button
Displays the Sleep Timer option.
24 SAP
Selects MTS sound: Mono, Stereo, and SAP in Analog
mode. Change the audio language in DTV mode.
25 LIGHT
Press the light button, white LED will be ON, release this
key, white LED will be OFF.
26 CHANNEL UP/DOWN
Press to scan through channels. To scan quickly through
channels, press and hold down either +/- .
27 Q.VIEW
Switch the current channel to the last channel you have
viewed.
Introduction
.
/ backward /Forward
REC