Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-M78SM-S2H User Manual

Am2+/am2 socket motherboard for amd phenom fx processor/ amd phenom x4 processor/ amd phenom x3 processor/ amd athlon x2 processor/ amd athlon processor/ amd sempron processor
Table of Contents

Advertisement

2-9

MB Intelligent Tweaker(M.I.T.)

CPU Frequency
HT Link Frequency
PCIE Clock
CPU Clock Ratio
Memory Controller Freq.
DRAM Configuration
DDR2 Voltage Control
CPU NB VID Control
CPU Voltage Control
Normal CPU Vcore
: Move
Enter: Select
F5: Previous Values
Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and we
recommend you not to alter the default settings to prevent system instability or other unex-
pected results. (Inadequately altering the settings may result in system's failure to boot. If this
occurs, clear the CMOS values and reset the board to default values.)
CPU Frequency (MHz)
Allows you to manually set the CPU host frequency.
Important It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
HT Link Frequency
Allows you to manually set the frequency for the HT Link between the CPU and chipset.
Auto
200 MHz~1 GHz
PCIE Clock (MHz)
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to
200 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto)
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the
CPU being used.
Memory Controller Freq.
Allows you to alter the memory controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being used.
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
(Note)
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS will automatically adjust the HT Link Frequency. (Default)
Sets HT Link Frequency to 200 MHz~1 GHz.
(Note)
[200]
[Auto]
[100]
[Auto]
[Auto]
1800Mhz
[Press Enter]
[Normal]
[Normal]
[Normal]
1.3500V
F10: Save
- 47 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents