Table of Contents
Advertisement
NV SATA 2 Primary RAID
Enabled
Enable 2nd SATA primary RAID function.
Disabled
Disable this function. (Default value)
NV SATA 2 Secondary RAID
Enabled
Enable 2nd SATA secondary RAID function.
Disabled
Disable this function. (Default value)
IDE Prefetch Mode
Enabled
Enable IDE Prefetch mode. (Default value)
Disabled
Disable IDE Prefetch mode.
USB Memory Type
SHADOW
Set USB memory type to SHADOW. (Default value)
Base Memory(640K)Set USB memory type to base memory(640K).
AC97 Audio
Auto
Enable onboard AC'97 audio function. (Default value)
Disabled
Disable this function.
Onboard 1394
Enabled
Enable onboard IEEE1394 function. (Default value)
Disabled
Disable onboard IEEE1394 function.
Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled
Disable onboard Serial port 1.
Onboard IrDA Port
Auto
BIOS will automatically setup the IrDA port address.
3F8/IRQ4
Enable onboard IrDA port and address is 3F8/IRQ4.
2F8/IRQ3
Enable onboard IrDA port and address is 2F8/IRQ3. (Default value)
3E8/IRQ4
Enable onboard IrDA port and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard IrDA port and address is 2E8/IRQ3.
Disabled
Disable onboard IrDA port .
Onboard Parallel Port
Disabled
Disable onboard LPT port.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
(Note) When using driver version 1.2, please enable "NV IDE/SATA RAID function" if you wish to
create RAID data drive or install O.S. on the RAID drive.
And manually set "NV SATA1/NV SATA 2 class code" from 0101 to 0104. If your SATA hard
drive is connected to the SATA0 or SATA1 connector , please set "NV SATA1 class code" to
0104. If your SATA hard drive is connected to the SATA2 or SATA3 connector, please set "NV
SATA2 class code" to 0104.
- 37 -
BIOS Setup
Advertisement
Table of Contents
