2.16 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.17 Installing Windows
TM
Vista
64-bit With RAID Functions
If you want to install Windows
RAID disk composed of 2 or more SATA3 HDDs with RAID functions, please follow
below steps.
STEP 1: Set up UEFI.
A.
Enter UEFI SETUP UTILITY
Configuration.
B.
Set the "SATA Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
your system.
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
45
TM
/
TM
TM
/ Vista
64-bit on a
Storage
TM
TM
/ Vista
64-bit OS on