ASROCK Fatal1ty Z87 Professional User Manual page 35

Chassis Speaker Header
(4-pin SPEAKER1)
(see p.11, No. 16)
SPDIF Out Connector
(2-pin SPDIF_OUT1)
(see p.11, No. 28)
Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.11, No. 19)
(3-pin CHA_FAN2)
(see p.11, No. 31)
(3-pin CHA_FAN3)
(see p.11, No. 30)
(3-pin PWR_FAN1)
(see p.11, No. 1)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.11, No. 3)
(3-pin CPU_FAN2)
(see p.11, No. 4)
ATX Power Connector
(24-pin ATXPWR1)
(see p.11, No. 7)
28
DUMMY SPEAKER
1
+5V DUMMY
1
GND
SPDIFOUT
CHA_FAN_SPEED
+12V
FAN_SPEED_CONTROL
GND
GND
+12V
FAN_SPEED
FAN_SPEED_CONTROL
CPU_FAN_SPEED
+12V
GND
FAN_SPEED
+ 12V
GND
12 24
1 13
Please connect the chassis
speaker to this header.
Please connect the
SPDIF_OUT connector of
a HDMI VGA card to this
header with a cable.
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
This motherboard pro-
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
This motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.