Hard Disk Security Submenu Of The Security Menu - Fujitsu LifeBook V1020 Bios Manual

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.
Drive0:
Password Entry on Boot:
F1
ESC
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive0:
___
Set Master
___
Password:
Set User
___
Password:
Password Entry ■ Disabled
on Boot: ■ Enabled
Phoenix TrustedCore(tm) Setup Utility
Info System Advanced
Hard Disk Security
Clear
Set Master Password [Enter]
Set User Password [Enter]
[Enabled]
Help Select Item
Exit Select Menu
Figure 14. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive0 Password has been set,
the field changes to Set. When this password is set, the primary hard disk
drive cannot be used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Master Password. The Master Password may
be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. When a Master Pass-
word is set, it must be used to access the hard drive if it is used in another
system. Note that the password will not take effect until the system has
been rebooted.
[Enter] Sets, changes or cancels the User Password. The User Password may be
up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When aUser Password is
set, it must be used to access the hard drive if it is used in another system.
Note that the password will not take effect until the system has been
rebooted.
[Enabled] When set to disabled, entry of a Hard Disk Password is not required
before OS boot. (The hard disk is still password-protected without pass-
word entry.)
Security Boot
-/Space Change Values
Enter Select Sub-Menu
S e c u r i t y M e n u
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
21