Hard Disk Security Submenu Of The Security Menu; Menu Field - Fujitsu Lifebook E-6624 Bios Manual

L i f e B o o k E S e r i e s B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security Submenu is for configuring hard disk security features.
Main
Primary Master Password Is:
Secondary Master Password Is:
Set Primary Master Password
Set Secondary Master Passwordz:
F1 Help
ESC Exit
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field

Options
Primary Master ___
Password Is:
Secondary Master
___
Password Is:
Set Primary ___
Master Password:
Set Secondary
___
Master Password:
24
PhoenixBIOS Setup Utility
Advanced Security
Hard Disk Security
Select Item -/Space
Select Menu Enter
Figure 15. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Primary Master Password has been set, the
field changes to Set. When this password is set, the primary hard disk drive cannot
be used in another system unless the password is entered.
Clear Display-only. Default is Clear. When Secondary Master Password has been set, the
field changes to Set. When this password is set, the secondary (modular) hard disk
drive cannot be used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Primary Master Password. The Primary Master Pass-
word may be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case- sensitive. When a Primary Master Pass-
word is set, it must be used to access the primary hard drive if it is used in another
system. Note that the password will not take effect until the system has been
rebooted.
[Enter] Sets, changes or cancels the Secondary Master Password. The Secondary Master
Password may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case- sensitive. When a Secondary Master
Password is set, it must be used to access the modular (secondary) hard drive if it is
used in another system. Note that the password will not take effect until the system
has been rebooted.
Power Savings Exit
Clear
Clear
[Enter]
[Enter]
Change Values
Select Sub-Menu
Item Specific Help
F9 Setup Defaults
F10 Save and Exit