Cd-Rom Drive; Loading A Cd; Removing A Cd - Fujitsu LifeBook E-6570 User Manual

CD-ROM Drive

Your Fujitsu LifeBook contains a 24x max CD-ROM
player. This gives you access to both software and audio
CDs. (Figure 4-4)
C A U T I O N
Do not operate your CD-ROM drive unless your
LifeBook is sitting on a flat surface. Using a CD
when the drive is not level may damage the drive
or prevent proper operation.

LOADING A CD

To load a CD into your CD-ROM drive, follow these
easy steps:
1. Push and release the eject button on the front of the
CD-ROM drive to open the holder tray. The tray
will come out of the LifeBook a short distance.
2. Gently pull the tray out until a CD can easily be
placed in the tray.
C A U T I O N
There may be a protective sheet in the tray when it was
shipped, please make sure it is removed before
operating.
3. Place the CD into the tray, label side up, with the
hole in the center of the CD. Snap the CD onto
the raised circle in the center of the tray.
4. Gently push the holder tray back in until you
hear a click. (Figure 4-5)
U s e r I n s t a l l a b l e F e a t u r e s
Figure 4-4 CD-ROM Drive
P O I N T
If you have disabled the Auto Insert Notification
Function, you will have to start the CD from your
desktop, as your LifeBook will not automatically
recognize that a CD has been loaded.
(a)
(c)

REMOVING A CD

1. Push and release the eject button on the front of
the CD-ROM drive. This will stop the CD and
the holder tray will come out of the LifeBook a
short distance.
2. Gently pull the tray out until the CD can easily
be removed from the tray.
3. Carefully remove the CD from the holder tray.
4. Gently push the holder tray back in until you
hear a click.
CD Eject Button
CD Holder Tray
(b)
(d)
Figure 4-5 Loading/Ejecting a CD
57