Canon PowerShot ELPH 115 IS User Manual page 224

ç Contents
• For information on the access point's encryption key, refer to the
body of the access point or its user manual.
• Up to 16 access points will be displayed. If no access points are
detected, choose [Manual Settings] in step 2 to manually set an
access point. Follow on-screen instructions and enter an SSID,
security settings, and an encryption key.
• When you use an access point that you have already connected to
for connecting to another device, [*] is displayed for the encryption
key in step 3. To use the same encryption key, press the <o><p>
buttons to choose [Next], and then press the <m> button.
• To add multiple computers, repeat the above procedures starting
from step 1.
ç Chapter Contents
z z Choose the computer to
connect to, following steps
7 – 8 in "Adding a Computer"
(= 220). The computer is now
added to the list.
224