Table of Contents
Advertisement
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.
■
A bootable CD-ROM has either a floppy disk or a hard drive format. When a bootable CD-ROM is used,
■
drive allocations change automatically without changing the BIOS setup. If floppy disk format is used, the
CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard
drive is not present or is disabled. A bootable CD-ROM cannot use a C: designation if a formatted internal
hard drive is present since the C: designator is always reserved for the internal hard drive.The boot
sequence ignores new drive designations, but your application software will use the new designations.
In order for a portable USB memory device (e.g., JumpDrive or memory stick) to be recognized in the Boot
■
Device Priority list, it must have been installed before booting the system.
Note that some older portable USB memory devices may not be recognized as bootable devices.
■
■
The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12]
key.
(See Using the TrustedCore Menu on page 2 for more information.)
Main
Boot priority order:
Excluded from boot order:
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Advanced
Security
Boot Device Priority
1:
Floppy Disk Drive
2:
Drive0: HTS421210H9AT00
3:
CD/DVD Drive
4:
NETWORK: B02 D00 Yukon PXE
5:
6:
7:
8:
:
USB MEMORY: None
:
USB HDD: None
Select Item
-/Space
Select Menu
Enter
Figure 16. Boot Device Priority Submenu
Power Savings
Boot
Item Specific Help
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
Change Values
F9
Select
Sub-Menu
F10
B o o t M e n u
Setup Defaults
Save and Exit
23
Advertisement
Table of Contents
