Interface Implementation; Supported Ata Commands; Supported Atapi Packet Commands - Sony SDX420C User Manual

Interface Implementation

Supported ATA Commands

ATA commands supported:
– ATAPI SOFT RESET (0x08)
– EXECUTE DRIVE DIAGNOSTIC (0x90)
– ATAPI PACKET COMMAND (0xA0)
– ATAPI IDENTIFY DEVICE (0xA1)
– STANDBY IMMEDIATE (0xE0)
– IDLE IMMEDIATE (0xE1)
– CHECK POWER MODE (0xE5)
– SLEEP (0xE6)
– SET FEATURE (0xEF)

Supported ATAPI Packet Commands

Mandatory ATAPI command set:
Supporting most of all SCSI commands in SDX-400C/SDX-500C
– ERASE
– INQUIRY
– LOAD/UNLOAD
– LOCATE
– LOG SELECT
– LOG SENSE
– MODE SELECT
– MODE SENSE
– READ
– READ POSITION
– REQUEST SENSE
– REWIND
– SPACE
– TEST UNIT READY
– WRITE
– WRITE FILEMARK
– WRITE BUFFER
17