Factory Settings - Fujitsu Plasmavision PDS5001 User Manual

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. 26–27 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be
displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines)
852 x 480
640 x 480
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1600 x 1200
640 x 480
848 x 480
720 x 485
720 x 575
640 x 400
* With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA, 75 Hz or less for XVGA/ SXGA , 60 Hz or less for UXGA.
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Horizontal
frequency (kHz) frequency (Hz)
15.73 59.94
15.63 50.00
31.47 59.94
31.25 50.00
45.00 60.00
37.50 50.00
33.75 60.00
28.13 50.00
• With the 800 x 600, 1024 x 768, 1280 x 1024 and 1600 x 1200 modes, pictures of reduced size are displayed on the screen, using size reduction and
interpolation. Note also that on-screen information is also displayed in reduced size.
• "Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range.
• You can check input signals through "Information" on the FEATURES Menu screen. (See P. 35.)
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
• Specifications and external appearance may be change for the sake of improvement.
• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
38
Horizontal frequency (kHz)
31.72
31.47
37.86
37.50
43.27
31.47
37.88
48.08
46.88
53.67
48.36
56.48
60.02
63.98
79.98
75.00
35.00
31.02
15.73
15.63
31.50
Vertical
Signal
SDTV 480I
SDTV 576I
SDTV 480P
SDTV 576P
HDTV 720P
HDTV 720P
HDTV 1080I
HDTV 1080I
Vertical frequency (Hz)
59.97
59.94
72.81
75.00
85.01
70.09
60.32
72.19
75.00
85.06
60.00
70.07
75.03
60.02
75.03
60.00
66.67
60.00
59.94
50.00
70.15
Main corresponding signals (Video, S-video mode)
Horizontal
frequency (kHz)
15.73
15.63
15.63
15.63
15.63
15.73
15.73
Signal
VGA
VGA 72 Hz
VGA 75 Hz
VGA 85 Hz
400 lines
SVGA 60 Hz
SVGA 72 Hz
SVGA 75 Hz
SVGA 85 Hz
XGA 60 Hz
XGA 70 Hz
XGA 75 Hz
SXGA 60 Hz
SXGA 75 Hz
UXGA 60 Hz
MAC 13RGB
60 fields
50 fields
NEC 31 kHz
Vertical
Signal
frequency (Hz)
59.94 NTSC
50.00 PAL
50.00 SECAM
59.52 PAL60
50.00 N-PAL
59.95 M-PAL
59.94 4.43NTSC