Fujitsu Plasmavision PDS5001 User Manual page 23

Function Menu(See P . 28,30.)
Option
(1) 24 Frame Mode
(for Video, S-video, Comp.video)
(2) 3D Y/C
(for Video(3.58NTSC))
On Screen Menu(See P . 28,30)
Option
(1) OSD
(2) Language
Input Terminal Menu(See P . 28,31–32.)
Option
(1) Video Input
(for Video)
(2) S-video Input
(for S-video)
(3) BNC Input
(4) D-SUB Input
Function
Displays the optimum movie
pictures.
Selects whether to enable
the 3D Y/C circuit.
Function Operation
Selects whether to display Use
information other than
menus.
Selects language used for Display the "Language"
menus. selection screen and use
Press
in the selected language.
Function
Selects video mode.
Selects video mode.
Selects BNC Input signal.
Selects D-SUB Input
signal.
Operation
Use or for switching.
Use or for switching.
or for switching.
or
to select a language.
to display menus
Operation
Use or for switching.
Use or for switching.
Display BNC Input screen
and press or to select an
option.
Use or for switching.
Select Comp.video or Decoder
by Function to set up Mask.
Display D-SUB Input screen
and press or to select an
option.
Use or for switching.
Select Decoder by Function to
set up Mask.
Range
On (Movie) /
Off (Normal)
On (3D Y/C circuit) /
Off (3-line)
Range
On (displayed) /
Off (not displayed)
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
Range
Auto/NTSC/PAL/SECAM/
PAL60/N-PAL/M-PAL/
4.43NTSC
Auto/NTSC/PAL/SECAM/
PAL60/N-PAL/M-PAL/
4.43NTSC
Function
Comp.video/RGB-PC/
Decoder
Mask
Off/5/10/15 (dot)
Function
RGB-PC/Decoder
Mask
Off/5/10/15 (dot)
21