Using The Keystone Function; Using The Input List - LG PG65U Owner's Manual

30
USING THE PROJECTOR
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set at a right angle
to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
Keystone 0
CLOSE
1
Press the SETTINGS button.
2
, ,
Press the
select OPTION and press the OK
button.
3
, ,
Press the
select Keystone and press the OK
button.
4
Press the or
Keystone.
- Keystone can be adjusted from
-40 to 40.
5
Press the OK button after
adjustment.
or button to
or button to
button to adjusted

Using the Input List

Using the Input List
1
Press the INPUT button to access
the input sources.
- The connected input mode appears
first. However, AV / Component
input is always activated.
Input List
Component
2
Select an input signal using the INPUT
button and the projector is switched
only to the connected input mode. You
,
can use the
switch between all the input modes.
Adding an Input Label
Displays which devices are connected to
which input ports.
Input Label
Component
RGB-PC
Close
1
Press the INPUT button to access
the input sources.
2
Press the RED button.
3
Use the or
one of the input sources.
4
Use the or
of the input labels.
Move OK
USB RGB-PC
Input Label
,
or button to
button to scroll to
button to select one