Firmware - D-Link DHP-W311AV User Manual

Section 3 - Configuration
You can upgrade the firmware of the DHP-W310AV from this page. Make sure the firmware you would like to use is on the local hard drive of
your computer. Click Browse... to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at
http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

Firmware

Click on the blue hyperlink at the top of the
Information:
page the to find out if there is an updated
firmware or language pack. If a new version
exists, download the new firmware to your
hard drive.
Firmware Upgrade:
After you have downloaded the new firmware,
click Browse... to locate the firmware update on
your hard drive. Click Upload to complete the
firmware upgrade.
Language Pack
You can change the interface language of the
Upgrade:
device by uploading a language pack. To install
a language pack, click the Browse... button
to locate the D-Link language pack upgrade
file on your computer. Once you have found
the file, click the Upload button to begin the
language pack upgrade process. This can take
a minute or more. Finally, wait for the device to
reboot. This process can take about 75 seconds.
D-Link DHP-W311AV User Manual
Firmware
27