Modem Test; Status; Network Statistics; Connection Status - Asus AAM6020BI-T4 User Manual

4.7.6

Modem Test

The Modem Test is used to check whether your Modem is properly connected to the WAN Network. This
test may take a few seconds to complete. To perform the test, select your connection from the list and press
the Test button. Before running this test, make sure you have a valid DSL link; if the DSL link is not
connected, this test will always fail.
Also the DSLAM must support this feature; not all DSLAMs have F4 and F5 support.
4.8

Status

The Status section allows you to view the Status/Statistics of different connections and interfaces
4.8.1

Network Statistics

Select to view the Statistics of different interfaces - Ethernet/USB/DSL.
4.8.2

Connection Status

Select to view the Status of different connections.
4.8.3

DHCP Clients

Select to view the list of DHCP clients.
4.8.4

Modem Status

Select to view the Status and Statistics of your broadband (DSL) connection.
4.8.5

Product Information

You can display the CPE's driver and run-time information by going to the Home screen, under the Status
title, click Product Information.
Figure 20 (Ping test)
34
AAM6030BI User Manual
34