Table of Contents
Advertisement
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values range from
0 to 10 seconds.
This feature will only work when set under normal boot.
The following items appear only when you set the Boot Logo Display to [Disabled].
Post Report [5 sec]
This item allows you to select a desired POST report waiting time
Configuration options: [1 sec] - [2 sec] [Until Press ESC]
2.8.5
Bootup NumLock State [On]
[On]
[Off]
2.8.6
Wait For 'F1' If Error [Enabled]
[Disabled]
[Enabled]
2.8.7
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
2.8.8
Interrupt 19 Capture [Disabled]
Allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [Enabled]
2.8.9
Setup Mode [EZ Mode]
[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
2.8.10
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
2-40
Set the power-on state of the NumLock to [On].
Set the power-on state of the NumLock to [Off].
Disables the function.
The system waits for the <F1> key to be pressed when error occurs.
The third-party ROM messages will be displayed during the boot sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Allows you to go to EZ Mode of the BIOS after POST.
ASUS Z87-C
Hide quick links:
Advertisement
Table of Contents
