Gigabyte G1.Sniper 3 User Manual page 58

OnBoard LAN Controller#1 (Qualcomm Atheros Killer E2201 LAN Chip, LAN1)
&
Enables or disables the Qualcomm Atheros Killer E2201 LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Intel(R) Smart Connect Technology
`
ISCT Configuration
&
Enables or disables Intel Smart Connect Technology. (Default: Disabled)
Marvell ATA Controller Configuration
`
GSATA Controller (Marvell 88SE9172 Chip, GSATA3 6 and GSATA3 7 connectors)
&
Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or configures
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.
AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
RAID Mode Enables RAID for the SATA controllers.

Disabled Disables this function.

GSATA Controller (Marvell 88SE9172 Chip, GSATA3 8 and GSATA3 9 connectors)
&
Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or configures
the SATA controllers to AHCI mode. The area below displays the current status of the two SATA ports.
IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE

mode.
AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
RAID Mode Enables RAID for the SATA controllers.

Disabled Disables this function.

BIOS Setup - 58 -