Table of Contents
Advertisement
3. Parallel Printer Connector (26 Pin Block)
Connection for the included parallel port ribbon cable with mounting bracket.
Connect the ribbon cable to this connection and mount the bracket to the case
on an open slot. It will then be available for a parallel printer cable. Note:
Serial printers must be connected to the serial port. You can enable the parallel
port and choose the IRQ through BIOS Setup Chipset Features "Onboard
Parallel Port." (Pin 26 is removed to prevent inserting in the wrong orien-
tation when using ribbon cables with pin 26 plugged)
4. Serial port COM1 and COM2 connectors (Two 10-pin blocks)
These connectors support the provided serial port ribbon cables with mounting
bracket. Connect the ribbon cables to these connectors and mount the bracket
to the case on an open slot. The two serial ports on the mounting bracket will
then be used for pointing devices or other serial devices. See Chipset Fea-
tures for BIOS configuration of "Onboard Serial Port." (Pin 10 is removed
to prevent inserting in the wrong orientation when using ribbon cables
with pin 10 plugged)
18
III. INSTALLATION
Pin 1
Parallel (Printer) Connector
Pin 1
COM 1
Pin 1
COM 2
Serial Port Connectors
ASUS P/I-P65UP5 User's Manual
Advertisement
Table of Contents
