Symbio™ Media Box And Blu-Ray Disc™ Player Connections; Connecting To A Tv; Connecting To The Digital Av Receiver/Amplifier; Connecting To Network - Toshiba Symbio BDX2400KU User Manual

Symbio
TM
Symbio™ Media Box and Blu-ray Disc™ Player connections
It is important to connect the player to the Internet and AV devices first, before connecting the player to AC
power.

Connecting to a TV

Connect a HDMI cable from the HDMI
TM
An HDMI cable carries both video and audio signals. If you wish to use TV speakers, you do not need to
TM
make an additional audio connection.
(Sample Illustration) Connecting to a TV - HDMI

Connecting to the digital AV receiver/amplifier

Route the sound from this player to the AV receiver/amplifier/sound system to enhance audio output.
Connect a coaxial cable from the COAXIAL jack on this player to the COAXIAL jack on the device.
(Sample Illustration) Connecting to a digital AV receiver/amplifier

Connecting to network

Your Symbio™ Media Box and Blu-ray Disc™ Player can be connected to your home network:
Using a wired network provides the best performance because the attached device and player are
connected directly to the network and are not subject to radio frequency interference.
To use a wireless connection, you can connect through a wireless LAN adapter and a wireless access
point or router (for BDX2400KU model).
To use a wireless connection, you can connect through the built-in wireless device and a wireless access
point or router (for BDX3400KU model).
Media Box and Blu-ray Disc
output jack on this player to the HDMI
TM
HDMI cable
TM
(not supplied)
Digital audio coaxial cable
(not supplied)
Player connections
TM
cable
TM
15
input jack on the TV.
TM
Digital AV receiver/
amplifier