Using The Fingerprint Reader - Lenovo ThinkPad S430 User Manual

2. Save all open files, and exit all applications.
3. Turn your computer off and then turn it on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Using the cursor keys, move to Security. The Security menu opens.
6. Using the cursor keys, move to Security Chip, and press Enter. The Security Chip submenu opens.
7. Using the cursor keys, move to an item you want to set. When the item is highlighted, press Enter.
8. Set other items that you want to set.
9. Press Fn + F10 to save changes and exit.
10. Press Enter in the Setup Confirmation window to confirm the exit.

Using the fingerprint reader

Your computer has an integrated fingerprint reader. Fingerprint authentication can replace passwords and
enable simple and secure user access. By enrolling your fingerprint and associating it with a Windows
password you can log on to the computer by swiping your finger over the reader, without typing passwords.
Enrolling your fingerprint
To use the integrated fingerprint reader, begin by enrolling your fingerprint as follows:
1. Turn on your computer.
2. Do either of the following:
• If your system is installed with the Windows 7 operating system, to start the Lenovo Fingerprint
software, refer to "Accessing Lenovo programs on the Windows 7 operating system" on page 15.
• If your system is installed with the Windows 8 operating system, to start the Lenovo Fingerprint
software, refer to "Accessing Lenovo programs on the Windows 8 operating system" on page 16.
3. Follow the instructions on the screen to enroll your fingerprint. For details, refer to the help information
system for the program.
Swiping your finger over the reader
To swipe your finger over the reader, do the following:
54
User Guide