Usb Operations; Playing A Usb Device - JVC KW-NSX1 Instruction Manual

USB operations

Playing a USB device

• This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/
WAV files stored in a USB mass storage class device.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• Make sure all important data has been backed up to
avoid losing the data.
* Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod>).
Connecting a USB device
You can connect a USB mass storage class device such as
a USB memory, Digital Audio Player, etc. to the unit.
• You cannot connect a computer or portable HDD to
the USB cable from the rear of the unit.
The source changes to "USB" and playback starts.
• All tracks in the USB device will be played repeatedly
until you change the source.
Cautions:
• This unit may not play back files in a USB device
• USB devices equipped with special functions such as
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and
• This unit cannot recognize a USB device whose rating
• This unit may not recognize a memory card inserted
• Connect only one USB device to the unit at a time. Do
• When connecting with a USB cable, use the USB 2.0
• The maximum number of characters for (when the
• Avoid using the USB device if it might effect driving
• Do not pull out and connect the USB device
• Electrostatic shock at connecting a USB device may
USB cable from the
rear of the unit
• Operation and power supply may not work as
• Do not leave a USB device in the car, or expose
24
properly when using a USB extension cord.
data security functions cannot be used with the unit.
connection ports, some USB devices may not be
attached properly or the connection might be loose.
is other than 5 V and exceeds 1 A.
into the USB card reader.
not use a USB hub.
cable.
characters are 1 byte):
– Folder names: 50 characters
– File names: 50 characters
safety.
repeatedly while "Now Reading" is shown on the
screen.
cause abnormal playback of the device. In this case,
disconnect the USB device then reset this unit and
the USB device.
intended for some USB devices.
to direct sunlight or high temperature to avoid
deformation or damage to the device.