Programming The Remote - LG 37LC2R Owner's Manual

APPENDIX

PROGRAMMING THE REMOTE

The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-control-
lable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
1
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on the
component such as a VCR and press the corresponding mode button (such as a D D V V D D or V V C C R R ) on the
remote control, while pointing at the component. Test the P P O O W W E E R R and P P R R + + / / - - buttons to see if the com-
ponent responds properly. If not, the remote requires programming to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as a D D V V D D or
2
V V C C R R ) on the remote control. The remote control button of desired device is lighted.
3 Press the M M E E N N U U and M M U U T T E E buttons simultaneously, the remote control is ready to be programmed for the
code.
Enter a code number using the N N U U M M B B E E R R buttons on the remote control. Programming code numbers for
4
the corresponding component can be found on the following pages. Again, if the code is correct, the device
will turn off.
Press the M M E E N N U U button to store the code.
5
6
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
78