Table of Contents
Advertisement
Note: The first time you use the AT&T Code Scanner, you will
need to download the updated application from the Play
Store. When the Play Store page displays, tap Update.
For more information, refer to "Play Store" on page
168.
2. Sign on to your Google account if you are not already
signed on. For more information, refer to "Creating a
New Google Account" on page 13.
3. Read the Terms and Conditions and tap Accept to
continue.
4. At the My Profile screen, tap OK to allow your location
information to be used or tap Don't Allow to bypass.
5. Enter your information in the My Profile section.
6. Tap ON to activate your profile. This allows the
application to customize your results. For example,
your zip code may help to deliver a coupon for a
restaurant in your neighborhood. You can toggle the
activation button between ON and OFF.
7. Tap Done.
154
8. Read the tutorial and tap Next until you are at the end
of the tutorial. Tap Finish.
9. Position your phone approximately 2-5 inches from the
barcode. Ensure that the barcode is completely within
the window. Keep your phone steady for best results.
10. The scanner will automatically scan the barcode. It
may take several seconds.
11. After the scan, tap Yes to open the web page to view
the information on the barcode that was scanned.
AT&T DriveMode
With the AT&T DriveMode application, you can set your
phone to auto reply when you are driving and don't want to
answer the phone. You can set auto reply to Messages,
Emails, and Phone Calls. You can also allow up to five of your
contacts to contact you while you are in Drive mode.
1. From the Home screen, tap
.
The AT&T DriveMode screen is displayed.
2. Read the Terms and Conditions and Privacy Policy and
tap Accept to continue.
3. Read the additional information and tap Continue.
AT&T DriveMode
Advertisement
Table of Contents
