Reset All - FujiFilm FinePix Z10fd Owner's Manual

Using [PLAYBACK MENU]
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the [WITH DATE] setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
Z10fd may not be specified DPOF settings.
Intelligent Face Detection
When setting images taken with Intelligent Face
Detection (➝p.28) (
you press (Intelligent Face Detection), frames appear
around the faces detected by the camera, and the number
of frames is set as the number of prints. This allows you
to easily prepare the same number of prints as the
number of people detected by the camera.
In addition, you can adjust the number of prints by
n o
pressing or
number of detected faces, press
Detection) again.
Make sure to press MENU/OK when your settings are
complete.
88
PRINT ORDER (DPOF) PRINT ORDER (DPOF)
DPOF : 00000 DPOF : 00000
SHEETS SHEETS
00 00
FACE COUNT FACE COUNT
FRAME FRAME SET SET
appears on the LCD monitor), if
. To reset the number of prints to the
(Intelligent Face

[RESET ALL]

To cancel all DPOF settings:
RESET DPOF OK? RESET DPOF OK?
YES YES
Select [RESET ALL] in the [PLAYBACK MENU] (➝p.86).
Press MENU/OK.
MEMO
12 / 31 / 2050 12 / 31 / 2050 12 / 31 / 2050
250 250 250 F4.2 F4.2 F4.2
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
Setting the menu (➝p.75)
CANCEL CANCEL
100 - 0001 100 - 0001 100 - 0001
10:00 AM 10:00 AM 10:00 AM