FujiFilm FinePix Z2 Owner's Manual page 47

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
6.2.2 Specifying images for printing without using DPOF ( single-frame printing )
1
1 0
2 0
P I C T B R I D G E P I C T B R I D G E
ENGLISH ENGLISH
1
SET SET
2
NTSC NTSC
3
OK OK
2
0 1 2 0
3
3
4
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
92
1 Press the " w
" button for about 1 second to turn
the camera on in Playback mode.
2 Select " ® ò
" PICTBRIDGE in " " USB MODE
˜
in the " " SET-UP menu (➡P.78).
3 Turn the camera off.
●
!
ò
Do not connect to a PC when the " " USB MODE setting is
set to " ® " PICTBRIDGE. See P.108 if you connect to a PC
by mistake.
1 Connect the cradle to the printer using the USB
cable (mini-B).
2 Plug the AC power adapter connector into the
"DC IN 5V" socket on the cradle and then plug
the AC power adapter into the power outlet.
3 Set the camera in the cradle.
4 Turn the printer on.
●
!
Plug the camera securely and vertically into the cradle
connecting plug.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on FinePix Z2.
Press the "POWER" button on the cradle.
"CHECKING USB" appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the " ò
MODE setting is " ® " PICTBRIDGE.
●
!
Depending on the printer, some functions are disabled.
5
1 0
PICTBRIDGE PICTBRIDGE
PRINT WITH DATE PRINT WITH DATE
PRINT WITHOUT DATE PRINT WITHOUT DATE
PRINT DPOF PRINT DPOF
6
1 0 2 0
T O TA L 00009
T O TA L
01 S H E E T S S H E E T S
F R A M E F R A M E
Y E S Y E S
7
P R I R I N T I N G N G
C A N C E L C A N C E L
Disconnecting the printer
" USB
1 Press "a" or "b" to select "PRINT WITH DATE"
2 0
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press "c".
O K O K
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
1 Press "d" or "c" to display the frame (file) for
0 3
which you want to specify PRINT settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
00009 00009 00009
and 2.
3 Always press the "MENU/OK" button after the
settings are completed.
●
!
Movie images cannot be printed.
●
!
Images photographed with a camera other than FinePix Z2
C A N C E L C A N C E L
may not be printed.
"PRINT OK?" appears on the LCD monitor.
Press the "MENU/OK" button to download the data
to the printer and start printing the specified
number of prints.
1 1 1 1 9 9 9 9 9 S H E E T S
S H E E T S
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1 Check that "PRINTING" is not displayed on the
camera's screen.
2 Press the "POWER" button on the cradle to turn
the power off.
6
93