FujiFilm FINEPIX XP30 XP30 Owner's Manual page 114

Problems and Solutions
Problem Problem
The fl ash does not fi re. The fl ash does not fi re.
Some fl ash modes are Some fl ash modes are
not available. not available.
The fl ash does not fully The fl ash does not fully
light the subject. light the subject.
Pictures are blurred. Pictures are blurred.
Pictures are mottled. Pictures are mottled.
Vertical lines appear in Vertical lines appear in
pictures. pictures.
96
• • The fl ash is not available in the current shooting mode The fl ash is not available in the current shooting mode: Choose a diff erent shooting mode
( ( P P 24).
24).
• • The battery is exhausted The battery is exhausted: Charge the battery or insert a fully-charged spare battery (
• • The camera is in continuous mode The camera is in continuous mode: Select
• • The camera is in silent mode The camera is in silent mode: Turn silent mode off (
• • The fl ash is off ( The fl ash is off ( P P ) ) : Choose a diff erent fl ash mode ( : Choose a diff erent fl ash mode (P
• • The desired fl ash mode is not available in the current shooting mode The desired fl ash mode is not available in the current shooting mode: Choose a diff erent
P 24).
shooting mode ( shooting mode (P 24).
• • The camera is in silent mode The camera is in silent mode: Turn silent mode off (
• • The subject is not in range of the fl ash The subject is not in range of the fl ash: Position the subject in range of the fl ash (
• • The fl ash window is obstructed The fl ash window is obstructed: Hold the camera correctly (
• • The protective glass covering the lens is dirty The protective glass covering the lens is dirty: Clean the glass (
• • The protective glass covering the lens is blocked The protective glass covering the lens is blocked: Keep objects away from the lens (
• • s s is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red: Check focus
P 99).
before shooting (P before shooting ( 99).
• • k k is displayed during shooting
is displayed during shooting: Use the fl ash or a tripod (
This is normal when slow shutter speeds are selected at high temperatures and does not indicate This is normal when slow shutter speeds are selected at high temperatures and does not indicate
a malfunction. a malfunction.
The camera has been used continuously at high temperatures. Turn the camera off and wait for The camera has been used continuously at high temperatures. Turn the camera off and wait for
it to cool down. it to cool down.
Solution Solution
: Charge the battery or insert a fully-charged spare battery (P
: Select OFF OFF for for
: Turn silent mode off (P
P 37).
: Turn silent mode off (P
: Position the subject in range of the fl ash (P
: Hold the camera correctly (P
: Clean the glass (P
: Keep objects away from the lens (P
: Use the fl ash or a tripod (P
: Choose a diff erent shooting mode
P 68).
R R CONTINUOUS ( (P CONTINUOUS
P 81).
81).
37).
: Choose a diff erent
P 81).
81).
P 20).
20).
P 92).
92).
P 38).
38).
Troubleshooting
P 7). 7).
68).
P 109).
109).
P 20).
20).
: Check focus