Iso; Image Size - FujiFilm FinePix XP10 series Owner's Manual

n ISO
Control the camera's sensitivity to light with P.
Higher values can be used to reduce blur when
lighting is poor; note, however, that mottling
may appear in pictures taken at high sensitivities.
If AUTO is selected, the camera will adjust
sensitivity automatically in response to shooting
conditions.
Settings other than AUTO
are shown by an icon in the
monitor if you use P.
o IMAGE SIZE
Choose the size at which still pictures are
recorded. Large pictures can be printed at large
sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Option Option
y
31 × 23 cm/12.2 × 9 in. (y) or 31 × 21 cm/
r3 : 2
12.2 × 8.2 in. (r3 : 2). Choose y for high-
800
g16 : 9 quality prints, r3 : 2 for an aspect ratio of
3:2, g 16:9 for an aspect ratio of 16:9.
0
n
22 × 16 cm (8.7 × 6 in.)
m16 : 9 17 × 13 cm (7 × 5.1 in.)
m
14 × 10 cm (5.5 × 3.9 in.)
5 × 4 cm (1.9 × 1.5 in.). Suited to e-mail or the
p
web.
The number of pictures that can be taken at
current settings (pg. 105) is displayed to the right
of the image quality icon in the monitor.
Note
Image size is not reset when the camera is turned off
or another shooting mode is selected.
The Shooting Menu
Prints at sizes up to Prints at sizes up to
63