FujiFilm FinePix S8000FD Owner's Manual page 74

Using [p-MODE MENU] (Photography)/[SHOOTING MENU]
Menu
[ CONTINUOUS]
(➝p.81)
[H FOCUSING]
(➝p.84)
[ AF MODE]
(➝p.86)
[GSHARPNESS]
(➝p.88)
[ FLASH]
(➝p.88)
[ BRACKETING]
(➝p.89)
74
This setting can be used when the Mode dial is set to anything other
than and .
Use this setting to select the required Continuous shooting mode.
This setting can be used when the Mode dial is set to N, <, M, or >.
Use this setting to specify the focusing mode.
This setting can be used when the Mode dial is set to N, <, M, or >.
Use this setting to specify the focusing area.
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to soften or emphasize the outline of an image.
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to adjust the amount of light emitted by the flash to suit
the photography conditions or to achieve a desired effect.
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to photograph the same image with different exposure
settings.
Functions
Factory
Settings
default
[OFF]/f/j/h/
[OFF]
/
/ /
/ /
[HARD]/
[STANDARD]/ [STANDARD]
[SOFT]
–2/3 EV to +2/3 EV
in approx. 1/3 EV
increments
±1/3 EV, ±2/3 EV,
±1/3 EV
±1 EV
0