Cyber-shot User Guide
Before Use
Operating the camera
Shooting
Viewing
Useful shooting functions
Useful viewing functions
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Shooting > Selecting the shooting mode based on the subject > Aperture Priority Shooting
Aperture Priority Shooting
You can manually adjust the amount of light that passes through the lens.
1. Set the mode dial to
(Aperture Priority Shooting).
2. Press
on the control wheel.
3. Turn the control wheel to select the aperture (F value).
You can select an aperture (F value) from F 3.5 to F 8.0. (When you turn the W/T (zoom) lever
to T side, the minimum aperture (F value) will increase.)
The shutter speed is automatically adjusted from 1/1600 to 8 seconds.
You can set the ISO setting with
4. Shoot with the shutter button.
Notes
If the proper exposure is not obtained after making the settings, the setting value indicators on the
screen flash when the shutter button is pressed halfway down. You can shoot in this condition, but
we recommend that you adjust the flashing values again.
About the aperture priority
The lower the aperture (F value), the wider the hole that lets light pass through. The depth of focus
decreases, and everything except objects within a narrow range of distance will be out of focus.
This is good for portraits, etc.
on the control wheel.
71
Search
Print