Accessories; Standard Accessories; Optional Accessories; Applications - Hitachi Koki GP 2 - GP2 1" Die Grinder (4.7 AMP) Safety Instructions And Instruction Manual

English
WARNING:

ACCESSORIES

WARNING:

STANDARD ACCESSORIES

(1) Wrench (43/64''(17mm)) (Code No.936638) ..................................................................... 1
(2) Wrench (15/32''(12mm)) (Code No.936553) ..................................................................... 1

OPTIONAL ACCESSORIES ..............

Collet chuck (for 1/8''(3.175mm) shaft)
Dimensions and handling methods other than the shaft hole are the same as those for
the 1/4''(6mm) collet chuck.
Case
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

APPLICATIONS

Finishing of dies for press working, die casting and moulding.
Finishing of thread cutting dies, tools and other small parts.
Internal grinding of tools and machine parts.
WARNING:
12
NEVER use an abrasive wheel, cutting wheel, or any wheel greater
than 1" in diameter. Using such wheels can result in wheel breakage,
and will otherwise increase the risk of bodily injury from contact with
the wheel or wheel fragments.
NEVER use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or
attachments not intended for use such as cup wheel, cut-off wheel or
saw blade is dangerous and may cause personal injury or property
damage.
To avoid the risk of serious injury, NEVER use this grinder with abrasive
wheels, cut-off wheels and/or saw blades.
sold separately