Using Composite Video (Good) - Insignia NS-50L440NA14 User Manual

Insignia 50" LCD TV

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
On your TV
Composite
video cable
connector
Composite
video jack
To connect a cable or satellite box using composite video:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y jack and L and R AUDIO jacks on
the side of your TV and to the composite video and audio out jacks on the cable or satellite box.
Notes
• The COMPONENT IN/AV IN VIDEO/Y, P
• When you connect the audio using the L and R AUDIO jacks, the audio
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select Component/AV, then press ENTER.
COMPONENT IN/AV IN VIDEO/Y jack.
Cable or
satellite box
Analog audio
cable
connectors
(composite video cable)
Analog
audio jacks
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite
device).
output is analog.
www.insigniaproducts.com
AV cable
, and P video jacks (used to
B R
Side of TV
15