Finishing Projecting Images - Epson PowerLite 4650 Operation Manual

1. Make sure the toolbar display is set to Full.
2. If you are connected to multiple projectors, click the
projector you want to control.
3. Click the
4. Perform one of the following operations.
• Switch to a computer source: Click the
• Switch to a video source: Click the
Parent topic:

Finishing Projecting Images

You can finish projecting images by using the toolbar.
Click the
standby screen is projected. The search and connect screen is displayed in EasyMP Network Projection
software.
Parent topic:
button on the toolbar.
Controlling the Projected Display
button to disconnect. The computer and the projector are disconnected and the LAN
Connecting to the Projector and Projecting Images
button on the toolbar and select the
button.
button.
44