Checking That The Wireless Lan Setting Is Completed - Canon Color imageCLASS MF8280Cw Settings Manual

Checking that the Wireless LAN Setting is Completed

1
(Status Monitor)
2
• Press [▲] or [▼] to highlight <Network Information>.
3
• Press [▲] or [▼] to highlight <IPv4>.
4
• Press [▲] or [▼] to highlight <IP Address>.
5
• Take note of the IP address.
1
Prepare for Wireless LAN Connection
If the screen is not displayed correctly:
2
Setting the Wireless LAN
Setting the Wireless LAN
6
(Status Monitor)
Start a Web browser from the computer

• Enter [http://<IP address that you have written
down in step >/] in the address field, and
5
then press [Enter] on your keyboard.
8
• Check that the screen of the Remote UI is
displayed.
Connection is completed
when the screen is displayed.
Proceed to P. 10
"The Remote UI is not displayed." (P.17)
3
Installing the Software
4
9
Troubleshooting