Table of Contents
Advertisement
K Using the Flash (Intelligent Flash)
When the flash is used, the camera's Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a flash mode, press the selector right (K). In modes other
than AUTO, the current mode is indicated by an icon in the monitor.
Choose from the following options (some options are not available
in all shooting modes):
Mode
Mode
AUTO/V
The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
K/U (fill flash)
when shooting in bright light.
W (suppressed
The flash does not fire even when the subject is poorly lit. 0 will appear in the monitor at
flash)
slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
Capture both the main subject and the background when shooting at night (note that
T/Z
brightly lit scenes may be overexposed). If U is selected for A SHOOTING MODE, shutter
(slow sync)
speed may be slow. Use a tripod.
Caution
• The flash may fire several times with each shot. Do not move the camera until shooting is complete.
Description
Description
35
Advertisement
Table of Contents
