To Set Up The Docking System - HP OmniBook 5500 - Notebook PC User Manual

To set up the docking system

1. Optional
To adjust the typing angle of keyboard, you can connect the tilt legs to the
docking system. Gently press inward on the tilt feet and snap on at one of the
three height settings shown below.
2. Unplug the OmniBook's ac adapter and cables, then close the cable door.
3. Open the OmniBook's docking port door and slide the door under the port.
4. Plug the power cord into the ac adapter, then into a grounded ac outlet. Plug the
connector from the ac adapter into the port on the back of the docking system.
71