FujiFilm FinePix A607 Owner's Manual page 36

u DPOF SET FRAME
PLAYBACK MENU
3
1 0
ＤＰＯＦ ＤＰＯＦ
◆
When DPOF settings were specified on another camera
4
1 0
ＤＰＯＦ：００００９ ＤＰＯＦ：００００９
０１ ０１ＳＨＥＥＴＳ ＳＨＥＥＴＳ
5
ＤＰＯＦ ＤＰＯＦ
ＴＯＴＡＬ／ ＴＯＴＡＬ／
Total number of prints
36
0 2
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＷＩＴＨ ＷＩＴＨ ＤＡＴＥ ＤＡＴＥ
１００−０００９ １００−０００９
ＲＥＳＥＴ ＤＰＯＦ ＲＥＳＥＴ ＤＰＯＦ ＯＫ？ ＯＫ？
ＹＥＳ ＹＥＳ ＮＯ ＮＯ
0 2
１００−０００９ １００−０００９
Total number of prints
Setting for that frame
ＦＲＡＭＥ ＦＲＡＭＥ
ＳＥＴ ＳＥＴ
１００−０００９ １００−０００９
９９ＳＨＥＥＴＳ ９９ＳＨＥＥＴＳ
1 Press "a " or "b " to select "WITH DATE" or
"WITHOUT DATE". Selecting "WITH DATE" will
cause the date to be imprinted on your prints.
2 Press the "MENU/OK" button.
●
!
When selecting the "WITH DATE" setting, the date is
imprinted on your shots using the Print Service or a DPOF-
compatible printer (depending on the printer specifications,
the date may not be printed in some cases).
When the data includes a frame (file) with DPOF
setting that were specified on another camera,
¥
" " appears.
Pressing the "MENU/OK" button erases all of the
DPOF settings already specified for each frame (file).
You must then specify the DPOF setting for each
frame (file) again.
●
!
Press the "DISP/BACK" button to leave the previous
settings unchanged.
1 Press "d" or "c" to display the frame (file) for
which you want to specify DPOF settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
●
!
Prints of up to 999 image frames (files) can be ordered on the
same xD-Picture Card.
●
!
DPOF settings cannot be specified for movies.
Pressing the "DISP/BACK" button during the
settings, all the new settings are cancelled. If there
were previous DPOF settings, only the
modifications are cancelled.
Always press the "MENU/OK" button to
complete the settings.
Pressing the "DISP/BACK" button, no DPOF
settings are specified.
◆
Canceling a frame
To cancel the DPOF setting for a frame you have
specified (cancel frame), perform steps
then:
1Press "d" or "c" to select the frame (file) with
the DPOF setting you want to cancel.
2Set the number of prints to 0(zero).
To cancel the DPOF setting for another frame (file),
repeat steps 1 and 2.
Press the "MENU/OK" button to complete the
settings.
◆
◆
1 3
to and