Dell Force10 Z9000 Configuration Manual page 745

Ftos configuration guide for z9000 system

Hide thumbs Also See for Force10 Z9000:

Table of Contents

Exception indicates that the number of CAM entries required to write the policy-map to the CAM

is greater than the number of available CAM entries, and therefore the policy-map cannot be

applied to an interface in the specified port-pipe.

Note: The command show cam-usage provides much of the same information as test cam-usage, but

whether or not a policy-map can be successfully applied to an interface cannot be determined without first

measuring how many CAM entries the policy-map would consume; the command test cam-usage is

useful because it provides this measurement.

Figure 35-18. test cam-usage Command Example

FTOS# test cam-usage service-policy input pmap_l2 linecard 0 port-set 0

===============================================================================

Quality of Service (QoS) | 745

Chapters

Table of Contents