Troubleshooting And Error Messages; Troubleshooting - Panasonic KX-WT125 Operating Instructions Manual

Troubleshooting and Error Messages

Troubleshooting and Error Messages

Troubleshooting

Problem
The handset
does not work.
The handset
does not ring.
You cannot
make/receive a
call.
You cannot dial.
68
Possible Cause
The batteries are drained.
The power is off.
Ringer volume is set to
"Off".
Silent Mode is set to "On",
is displayed on the
or
LCD.
The handset is out of
range, or the CS is busy.
The radio channel is busy,
or a radio communication
error occurred.
The number that you dialed
is restricted by the PBX.
Key lock mode is on.
The radio channel is busy
or a radio communication
error occurred.
Solution
Charge the batteries fully.
(See "Charging the Batteries"
on page 6.)
Re-insert the batteries, and
then set the handset on
the charger. (See "Battery
Installation" on page 5, and
"Charging the Batteries" on
page 6.)
Adjust the ringer volume
level.
(See "Adjusting the Ringer
Volume" on page 15.)
Press for more than 2
seconds to cancel the Silent
Mode.
Move closer to the CS or try
again later.
Try again later.
Consult your dealer.
To cancel the mode, press
for about 2 seconds.
(See "Key Lock" on page 9.)
Try again later.