Add The Custom Paper To The Printer With Spectrophotometer Unit Mounted - Canon imagePROGRAF iPF6450 Manual

Large-format printers calibration link setup guide

Hide thumbs Also See for imagePROGRAF iPF6450:

Table of Contents

2. ADD THE CUSTOM PAPER TO THE PRINTER WITH

SPECTROPHOTOMETER UNIT MOUNTED

Use the MCT installed on the computer for managing paper to add the custom paper to the

printer with spectrophotometer unit mounted and the printer driver, and then create the

calibration target. Use rolls at least 406.4mm (16 inches) wide for the custom paper. For the

specifications of the custom paper you can use, see P. 7.

Custom paper is added to the printer with spectrophotometer unit mounted by using the following

procedure.

Run the MCT (iPF6450 Media Configuration Tool for the iPF6450) for the printer where

the spectrophotometer unit is mounted on the computer for managing paper, and click the

Add and Edit Custom Paper button in the main window.

Select the printer with the spectrophotometer unit mounted to use for adding custom paper

in Printer in the Select Printer dialog box, and click the Next button.

Table of Contents

Imageprograf ipf9400s