Finding Battery Information; Conserving Battery Power; Identifying Low Battery Levels - HP ENVY TouchSmart 4-1200 User Manual

User guide - windows 8
Hide thumbs Also See for ENVY TouchSmart 4-1200:
Table of Contents

Advertisement

Start screen, and then select Battery and performance. If Battery Check indicates that your battery
should be replaced, contact support.

Finding battery information

To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check
in HP Support Assistant. To access battery information, select the HP Support Assistant app on the
Start screen, and then select Battery and performance.
HP Support Assistant provides the following tools and information about the battery:
Battery test
Information on battery types, specifications, life cycles, and capacity
To access battery information, select the HP Support Assistant app on the Start screen, and then
select Battery and performance.

Conserving battery power

Tips for conserving battery power and maximizing battery life:
Lower the brightness on the display.
Select the Power saver setting in Power Options.
Turn off wireless devices when you are not using them.
Disconnect unused external devices that are not plugged into an external power source, such as
an external hard drive connected to a USB port.
Stop, disable, or remove any external media cards that you are not using.
Before you leave your work, initiate Sleep or shut down the computer.

Identifying low battery levels

When a battery that is the sole power source for the computer reaches a low or critical battery level,
the following behavior occurs:
The battery light (select models only) indicates a low or critical battery level.
– or –
The power meter icon on the Windows desktop shows a low or critical battery notification.
NOTE:
power settings on page
The computer takes the following actions for a critical battery level:
If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains
briefly in the Sleep state, and then shuts down and loses any unsaved information.
If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
Hibernation.
46
Chapter 6 Managing power
For additional information about the power meter, refer to
45.
Using the power meter and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy touchsmart sleekbook 4-1100

Table of Contents