Table of Contents
Advertisement
TIMER FUNCTIONS
You can set "SLEEP TIMER" and "WAKE-UP TIMER" to
automatically turn off and on the LCD TV set.
1
Press MENU to display the Menu screen.
2
Press \/| to select "FEATURES".
3
Press '/" to select "TIMER FUNCTIONS", and press OK.
• The Timer functions Menu screen can be displayed directly by
pressing TIMER.
4
Press '/" to select "SLEEP TIMER", and press OK.
5
Press '/"/\/| to select "30MIN", "60MIN", "90MIN",
"120MIN", "150MIN" or "OFF", and press OK.
3
0
M I N
6
M I N
0
9
0
M I N
1 2
0
M I N
1 5
0
M I N
6
Press '/" to select "WAKE-UP TIMER", and press OK.
7
Press '/" to select the desired adjustment item, and
press \/| to adjust them.
S E T
W A K E - U P
T I M E
C H A N N E L
V O L U M E
8
Press MENU to exit.
Selected item
SET
To activate the Wake-up timer, set this item to "ON".
WAKE-UP TIME
Set the time at which you want to turn on the TV.
CHANNEL
Set the TV channel or input mode when the TV is turned on.
VOLUME
Set the volume when the TV is turned on.
NOTE
• When you set "WAKE-UP TIMER", the WAKE-UP TIMER indicator
lights up red.
• Be sure to adjust the clock with "CLOCK SETUP" in "SETUP"
before setting "WAKE-UP TIMER".
• You can output the picture and sound of the external device with
the "WAKE-UP TIMER" function. Make sure that the external
device turns on at the time you specified.
• The "CHANNEL" setting for "WAKE-UP TIMER" changes in the
following order: COMPONENT → AV1 → AV2 → AV3 →TV (0-99)*.
* The skipped channels cannot be selected.
• When not using the LCD TV set for a long period of time, either
turn off the main power or "WAKE-UP TIMER" set to "OFF".
• When "WAKE-UP TIMER" has been set to "ON", the LCD TV set is
turned on at the set time every day until it is set to "OFF".
• Always make sure to turn off the power with the remote control.
"WAKE-UP TIMER" will not be activated if the main power is
turned off with MAIN POWER on the LCD TV set.
• After the TV has been turned on by "WAKE-UP TIMER", "SLEEP
TIMER" is automatically set to "120MIN" for safety reason.
LC-22GA3H_E_P19-25.p65
O F F
O F F
0
:
0 0
C H
1
2
0
Description
23
Useful Features (Continued)
• You can check the time set in "WAKE-UP TIMER" by pressing
DISPLAY.
• When the time set for the "WAKE-UP TIMER" is reached when the
power is on, the LCD TV set changes to the set channel.
The sound volume does not change at this time.
• "AV3" in "CHANNEL" is not displayed when "OUT
in "AV3 IN/OUT".
AUTO POWER OFF
You can set the power to automatically turn off if there is no
signal for 5 minutes.
1
Perform steps 1 and 2 in TIMER FUNCTIONS to
display the Features Menu screen.
2
Press '/" to select "AUTO POWER OFF", and press OK.
3
Press '/" to select "ON", and press OK.
O N
O F F
4
Press MENU to exit.
NO OPERATION OFF
You can set the power to automatically shut down if there is
no operation for 3 hours.
1
Perform steps 1 and 2 in TIMER FUNCTIONS to
display the Features Menu screen.
2
Press '/" to select "NO OPERATION OFF", and
press OK.
3
Press '/" to select "ON", and press OK.
O N
O F F
4
Press MENU to exit.
BLUE BACK
Automatically turns the screen blue if no broadcast signal is
received.
1
Perform steps 1 and 2 in TIMER FUNCTIONS to
display the Features Menu screen.
2
Press '/" to select "BLUE BACK", and press OK.
3
Press '/" to select "ON", and press OK.
O N
O F F
4
Press MENU to exit.
NOTE
• When received signals are weak or interfered with by some other
signals, "BLUE BACK" may be activated. To watch the TV under
such conditions, set "BLUE BACK" to "OFF".
• "BLUE BACK" is activated when AV1, AV2, AV3 or COMPONENT
input mode is selected with no signal being input.
2004.9.9, 5:26 PM
" is selected
23
Advertisement
Chapters
Table of Contents
