Using As A Mass Storage Device - Samsung VP-MS10 Series Owner's Instruction Manual

ENGLISH Storage Mode:

Using as a Mass Storage Device

Using as a Mass Storage Device
You can use your Miniket Photo as a USB mass storage device.
1. Connect the Miniket Photo to the PC
with the provided USB cable as
shown in the figure.
2. Turn on your PC.
3. Turn the Mode Dial to Storage.
4. Press the [POWER] button to turn on
the Miniket Photo.
5. Set the desired memory type on the
PC.
N Windows XP: Dialog windows may
pop up overlapped.
Locate the <Miniket> or
<Removable Storage Device> recognised by the PC and then
double-click it.
N Other than Windows XP: It appears to have two instances of
"Removable Disk". If it displays D and E drives as removable
disks, D is the mini SD Memory Card and E is the internal
memory.
6. Copy files into the destination folder.
N In Windows XP
Internal Memory: <Miniket> - <MISC>
External Memory (mini SD Card): <Removable Disk> -
<MISC>
7. When finished, disconnect the cable.
[ Warning ]
✤ You cannot create a new folder on your Miniket Photo set.
✤ If you create a new folder on your mini SD card using a PC, it will
not appear on the set.
[ Notes ]
✤ Disconnecting the USB cable while the data transfer will stop the
data transfer and might damage the data stored.
✤ Multiple USB devices connected to a PC or using USB hubs may
cause communication / installation errors with the Miniket Photo.
✤ Pop up dialogs will appear differently whether the memory has files
or not.
134 134
Set the desired memory type on the
PC.
N
N
N
✤
✤
✤
✤
✤ Pop up dialogs will appear differently whether the memory has files
or not.