Samsung SP-P4251 Owner's Instructions Manual page 7

Side of the TV
S-Video Input
Video Input
Audio Input
(L, R)
Rear Panel
ΠDVI INPUT (DVI-D / L-AUDIO-R)
Connect to the digital video and audio
output jack of a device with DVI output.
´ MONITOR OUT (VIDEO / L-AUDIO-R)
Outputs for external devices
ˇ PC INPUT (RGB / AUDIO)
Connect to the video and audio output
jack on your PC.
¨ ONLY FOR SERVICE
Connector for service only.
ˆ S-VIDEO1, S-VIDEO2
(S-VIDEO1 or S-VIDEO2 / L-AUDIO-R)
Video and audio inputs for external
devices with an S-Video output, such as
a camcorder or VCR.
Ferrite Cores
The ferrite cores are used to attenuate
undesired signals. When connecting cables,
attach one of these ferrite cores to the cable
near the connector.
When you connect cable to
COMPONENT1, COMPONENT2,
and side AV attach ferrite core near
the connector and clip to secure it.
You can attach a ferrite core to more
than one cable. If the cable thickness
does not allow to secure it firmly,
wind the wire around the ferrite core
before closing it (as illustrated).
Ø AV1, AV2, AV3
(VIDEO / L-AUDIO-R)
Video and audio inputs for external
devices, such as a camcorder or VCR.
∏ COMPONENT1, COMPONENT2
Video (Y/P
inputs for Component.
" ANT IN VHF/UHF (75Ω)
75Ω Coaxial connector for
Antenna/Cable Network.
' POWER IN
Connect the supplied power cord.
/P ) and audio (L-AUDIO-R)
b r
7