What Is Anynet; Connecting Anynet + Devices - Samsung LE37M8 Owner's Instructions Manual

What is anynet + ?

anynet+ is an aV network system that enables an easy-to-use aV interface for users by controlling
all connected aV devices through the anynet+ menu when Samsung electronics aV devices are
connected.

Connecting anynet + Devices

the anynet+ system supports aV devices supporting anynet+ only.
Check if there is an anynet+ mark on the aV device to be connected to the tV.
to directly connect to tV
tV
hDmI 1. Cable
to connect to home theater
tV
hDmI 1. Cable
optical Cable
➣
Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on
the receiver.
➣
Connect only one receiver.
➣
You can listen to 5.1 channel sound through the home theater's speakers. Otherwise, you can only listen
to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home
theater and the TV correctly to listen to TV sound through the home theater. However, you cannot listen to
sound from the BD recorder that is sent to the home theater via the TV in 5.1 channel sound because the
TV outputs only 2 channel stereo sound. Please see the manual for the home theater.
➣
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+
functions.
➣
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
➣
Anynet+ supports up to 8 AV devices in total.
anynet+ Device 1 anynet+ Device 2 anynet+ Device 
hDmI 1. Cable
anynet+ Device 1
hDmI 1. Cable
hDmI 1. Cable
home theater
english - 55
hDmI 1. Cable
anynet+ Device 2
anynet+ Device 
hDmI 1. Cable
Connect the [HDMI 1], [HDMI
2] or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet+ device
using the HDMI cable.
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.