To Use Last Memory Function; Recoding Usb (Encoding); Searching For And Storing The Radio Stations; Selecting A Stored Station - Samsung MM-UC8 Instruction Manual

To use Last Memory function

B
Before you begin! Connect the external USB storage device to your player.
Select USB function by using the USB/AUX button.
Last Memory is a function that resumes playback from the last part of
the previous listening when the user reselects USB function again
after stopping the play, turning the power off or selecting another
function.
Press and hold the PROGRAM/SET button,
LAST ON and LAST OFF are repeatedly selected.
MUTE
TUNER
TIMER/CLOCK TIMER ON/OFF
BAND
USB/AUX PROGRAM/SET
MO/ST
SURROUND XT
SLEEP REC./PAUSE
COUNTER RESET USB REC.
18

Recoding USB (Encoding)

You can record the sounds of CD, MP3-CD, cassette tape, radio
broadcast and external device in the external USB storage device as
MP3 files.
Before you begin! Connect the external USB storage device to your player.
Select USB function by using the USB/AUX button.
Example: When recording a CD
1
Connect the external USB storage device to your player.
2 Press and hold the USB REC. button.
'SS-REC' directory is created in the external USB storage device
and the track is stored as MP3 file.
If SS-REC directory was already created, the MP3 file is saved in
the directory without creating another directory.
3
Press the Play/Pause (√/») button to play the CD.
Press the , button to select a desired track.
4
If you want to stop, press the USB REC. button again.
USB Recording (Encoding) Specifications
CD/MP3-CD: 128Kbps, 44.1KHz
Cassette Tape and External Device: 64Kbps, 24KHz
Radio Broadcast:64kbps,16KHz
USB Recording (Encoding) Specifications
MPEG 1, 2, 2.5 Layer 3
32Kbps~320Kbps
32KHz, 44.1KHz, 48KHz
1
USB/AUX PROGRAM/SET
MO/ST
2,4
SURROUND XT
SLEEP REC./PAUSE
COUNTER RESET USB REC.
REV.MODE SHUFFLE DEMO/DIMMER
CD/MP3-CD
3
TUNING/
VOLUME
ALBUM
TUNING
REPEAT
MODE
Depending on the type of the external USB storage device, recorded
(encoded) file may not be played from the external USB storage device.
But, the file will be played if the file is saved in the player.
When recording on an external USB storage device, check to make
sure that there are more than 10MB of free space.
When it is less than 10MB, you will not make a recording.
If you try to make a record on connecting an external USB storage
device, the recording may fail. Wait a moment after connecting an
external USB device until SPACE CHK message disappears on the
screen because SPACE CHK message appears when the player is
reading information necessary for recording.
When you make a recording a cassette tape, radio or other external
device for a long time, a new file is created and saved at every
21 minutes.
If you make a recording for longer than 21 minutes, approximate 10
seconds will not be recorded to prepare the following recording operation.
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
(option)
15 AM stations
15 FM stations
5 MW stations
(option)
5 SW1 stations
5 SW2 stations
1
Switch the system on by pressing ( ).
2
Select the required frequency band by pressing TUNER/BAND
again on the front panel or BAND on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
MW Medium Wave
SW1, SW2(OPTION)
Short Wave
To search for a Press TUNING MODE
3 station...
Manually One or more times until MANUAL
is displayed.
Automatically One or more times until AUTO is
displayed.
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4
Select the station to be stored by:
Pressing or buttons on the front panel or or
buttons on the remote control to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the or buttons.
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result: The PROG is displayed for a few seconds.
b Pressing or buttons on the front panel or or
buttons on the remote control to assign a program number .
c Press PROGRAM/SET to store the radio station.
Result: PROG is no longer displayed and the station is stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
2
3
4 5
4 5

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing ( ) .
2 Select the required frequency band by pressing TUNER/BAND on
the front panel.
3
Select the radio station as follows.
To listen to ... Press ...
Stored station 1. the TUNING MODE button until
"PRESET" is displayed.
2. or button to select the
required program.
1
2
3
3
3

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press MO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
MUTE
TUNER
TIMER/CLOCK TIMER ON/OFF
BAND
USB/AUX
PROGRAM/SET
MO/ST
REC./PAUSE SURROUND XT
SLEEP
COUNTER RESET USB REC.
REV.MODE SHUFFLE DEMO/DIMMER
CD/MP3-CD
GB
19